Repalce Heat Exchanger Gasket Alfa Laval M3

Do you know what heat exchanger gaskets are used for?NBR Gasket for Alfa Laval is used to seal heat exchanger pipe joints.NBR Gasket for Alfa Laval is generally made of metal materials such as stainless steel, copper and aluminum, but it is also useful for soft materials such as rubber and plastic. Its main function is to prevent air leakage, fill the uneven surface of the pipe joint, and ensure the sealing effect. Moreover,NBR Gasket for Alfa Laval can also work normally in a high temperature and high pressure environment to ensure the normal operation of the heat exchanger.

According to different application requirements, there are different types of heat exchanger gaskets, such as flat gaskets, corrugated gaskets, wound gaskets and so on. Choosing the right type of gasket depends on the working conditions and requirements of the heat exchanger.
In short, the EPDM Gasket for Alfa Laval is an important sealing element in the heat exchanger, which can ensure the normal operation of the heat exchanger and prevent the occurrence of air leakage and liquid leakage problems.

All PHE Gaskets and Plates are produced under approved production conditions, and both Rubber compounds and Plate material are analyzed on a third-party lab. Entrance material-control for Plates and gaskets is made at our own lab, to ensure compliance with certificates.

In general, it is possible to detect whether the sealing components of the heat exchanger have lost their function through the dripping during the cold movement of the Plate Heat Exchanger or the dripping during the shutdown cooling process. However, some Plate Heat Exchangers currently have a re adjustable function, which means that the heat exchange plate group can be tightened again when a small amount of dripping occurs, to increase the stress between the sealing pads and effectively solve the dripping phenomenon in a short period of time. In newly assembled heat exchangers, larger combination length dimensions can be used. When leakage occurs, tighten each group of plate heat exchangers. The maximum and minimum combination length dimensions can generally be seen on the nameplate of the heat exchanger. It should be noted that it cannot be less than the minimum combined length size. When the combined heat exchanger reaches the minimum combined length size and still experiences leakage, it indicates that the sealing gasket must be replaced. The reasons that have a significant impact on the service life of rubber sealing gaskets are the working mode of the heat exchanger, the corrosiveness of the heat dissipation medium and cleaning agent used, the highest working temperature, the highest working pressure, and the high stress and natural aging of the elastic sealing gasket caused by excessive and uneven pressure. If these occur, timely maintenance and upkeep or replacement should be carried out.